Filter
Top Products
202
Controls in detail
Automatic climate control
Air conditioning
The air conditioning is operational while
the engine is running and cools the interior
air to the temperature set by the operator.
Deactivating
It is possible to deactivate the air condi-
tioning (cooling) function of the automatic
climate control system. The air in the vehi-
cle will then no longer be cooled or dehu-
midified.
̈ Press button ± (୴ page 193).
The indicator lamp on the button ±
comes on.
Activating
Moist air can fog up the windows. You can
dehumidify the air with the air condition-
ing.
̈ Press ± again (୴ page 193).
The indicator lamp on button ±
goes out.
The air conditioning uses the refrigerant
R134a. This refrigerant is free of CFCs
which are harmful to the ozone layer.
Residual heat and ventilation
With the engine switched off, it is possible
to continue to heat or ventilate the interior.
This feature makes use of the residual heat
produced by the engine.
Activating
̈ Turn the SmartKey in the starter switch
to position 1 or 0, or remove it from the
starter switch.
̈ Press button T (୴ page 193).
The indicator lamp on button T
comes on.
i
Condensation may drip out from under-
neath the vehicle. This is normal and
not an indication of a malfunction.
!
If button ± on the automatic cli-
mate control panel starts to flash, this
indicates that the air conditioning is
losing refrigerant. The compressor has
turned itself off. The air conditioning
cannot be turned on again.
Have the air conditioning checked at
the nearest authorized Mercedes-Benz
Center.