Filter
Top Products
163
Controls in detail
Control system
Instrument cluster submenu
Access the
INST. CLUS.
submenu via the
SETTINGS
menu. Use the
INST. CLUS.
submenu to change the instrument cluster
display settings. The following functions
are available:
Selecting temperature display mode
̈ Move the selection marker with
the æ or ç button to the
INST.
CLUS.
submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
TEMP. INDICATOR
.
The selection marker is on the current
setting.
̈ Press æ or ç to set the temper-
ature unit to degrees Celsius (
°C
) or de-
grees Fahrenheit (
°F
).
Selecting multifunction display mode
̈ Move the selection marker with
the æ or ç button to the
INST.
CLUS.
submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
DISPLAY VALUES IN
.
The selection marker is on the current
setting.
̈ Press æ or ç to set speedome-
ter unit to
MILES
or
KM
.
Function Page
Select temperature display
mode
163
Select multifunction display
mode
163
Select language 164
Select tire inflation pressure unit 164