Filter
Top Products
152
Controls in detail
Control system
Operational readiness of CD changer
If a CD changer has been installed in the
system, it can be operated from the
COMAND system key pad located in the
center dashboard. A loaded magazine
must be installed for CD playing.
Loading/unloading the CD magazine
The CD changer is located behind the cov-
er on the left hand side in the trunk.
̈ Remove the CD changer cover.
̈ Slide the CD changer door to the right
and press the eject button g.
̈ The magazine is ejected.
1 CD
2 CD changer
3 CD tray
4 CD magazine
̈ Remove the magazine 4 and com-
pletely pull out the CD tray 3.
̈ Place the CD 1 in the recess of the
tray 3, label side up.
̈ Push the tray 3 into the magazine 4
in the direction shown by the arrow.
̈ Push the magazine 4 into the CD
changer 2 in the direction shown by
the arrow and close the CD changer
door.
Warning! G
The CD changer is a Class 1 laser product.
There is a danger of invisible laser radiation
if the cover is opened or damaged.
Do not remove the cover. The CD changer
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
i
CDs which have been inserted improp-
erly or are unreadable will not be
played.