Filter
Top Products
121
Controls in detail
Seats
Placing head restraints upright
̈ Pull the rear head restraint upright until
it locks into position.
Placing power head restraints* upright
(rear outer seats)
̈ Switch on the ignition (୴ page 34).
̈ Press and hold switch 1 in the front
center console and hold.
The rear outer seats head restraints
will fold upright.
̈ Pull the rear center seat head restraint
upright manually until it locks into posi-
tion.
Folding down and placing upright pow-
er head restraints* with the switches in
the rear doors (rear outer seats)
You can fold the rear outer seats power
head restraints backward or upright using
the head restraint folding switches in the
respective rear doors.
1 Head restraint switch, rear
̈ Switch on the ignition (୴ page 34).
or
̈ Open the respective door.
̈ Press switch up in the direction of
arrow 1.
The rear outer seats power head re-
straint will fold upright.
̈ Press switch down in the direction of
arrow 1.
The rear power head restraint will fold
backward.
!
Make sure the head restraints engage
when placing them upright manually.
Otherwise their protective function
cannot be ensured.
Warning! G
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.