Filter
Top Products
424
Practical hints
Opening/closing in an emergency
2 Hex wrench
̈ Insert long side of hex wrench 2 into
opening.
̈ Using hex wrench 2, press release
catch down in direction of arrow.
The roll bar extends with a loud sound.
̈ Repeat this step for the second roll bar.
Have the systems checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
Lowering roll bars manually
With the soft top open, you can lower the
roll bars manually after they have been re-
leased.
1 Orientation seam
2 Hex wrench
3 Press wrench down
4 Press head restraint down
̈ Take hex wrench out of its storage
location in the storage well casing
(
୴ page 413).
̈ Align hex wrench so that its long side is
parallel to orientation seam 1 and in-
sert hex wrench 2 into gap on left side
of respective head restraint.
i
With the roll bars released, the soft top
cannot be operated using the soft top
switch and the rear head restraints
cannot be lowered using the rear head
restraint lowering switch.
Warning! G
Never lower the roll bars manually unless
the soft top is open. Otherwise, the roll bars
function could be impaired, no longer reduc-
ing your risk of injury in an optimal manner.
Contact an authorized Mercedes-Benz Cen-
ter to have the roll bar lowered when the
soft top is closed.
୴୴