Filter
Top Products
183
Controls in detail
Good visibility
Activating exterior rear view mirror
parking position
Follow these steps to activate the mirror
parking position so that the
passenger-side exterior rear view mirror
will be turned downward to the stored
position.
The buttons are located above the exterior
lamp switch.
1 Driver’s side exterior rear view mirror
button
2 Passenger-side exterior rear view
mirror button
̈ Make sure you have stored a parking
position for the passenger-side exterior
rear view mirror (
୴ page 126).
̈ Make sure the
Mirror adjustment
parking aid function
in the
Convenience
submenu of the control
system is switched to
on
(୴ page 161).
̈ Switch on the ignition (୴ page 34).
̈ Press button 2 for the passenger-side
exterior rear view mirror.
̈ Place the gear selector lever in reverse
gear R.
The passenger-side exterior rear view
mirror will be turned downward to the
stored position.
The exterior rear view mirror returns to its
previously stored driving position:
ț ten seconds after you put the gear se-
lector lever out of position R
ț immediately once your vehicle exceeds
a speed of approx. 6 mph (10 km/h)
ț immediately when you press button 1
for the driver’s side mirror.