Filter
Top Products
156
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Set-
tings
menu. Use the
Lighting
submenu
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
button æ or ç to the
Lighting
submenu.
̈ Press button j or k repeatedly
until the message
Lamp circuit
headlamp
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
manual operation (
manual
) or daytime
running lamp mode (
constant
) activat-
ed.
With daytime running lamp mode activated
and the exterior lamp switch in
position M or U the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
Function Page
Setting daytime running lamp
mode (USA only)
156
Setting locator lighting 157
Exterior lamps delayed
switch-off
158
Interior lighting delayed
switch-off
159
i
This function is not available in
countries where the daytime running
lamp mode is mandatory and therefore
in a constant mode.