Filter
Top Products
88
Safety and Security
Occupant safety
2 Hook
3 Anchorage ring
̈ Swing rear seat backrest to the rear un-
til it engages.
̈ Check the rear seat backrest to be
locked in its upright position
(
୴ page 399).
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Secure the child restraint and
tighten the top tether strap according to
the child restraint manufacturer’s instruc-
tions.
Child seat anchors - LATCH type
This vehicle is equipped with two LATCH
(L
ower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a “LATCH”
child seat with the matching mounting fit-
tings.
The anchors are located behind an uphol-
stery blend.
1 Indicates the position of the anchors
2 Anchors
̈ Lift up upholstery blend to access the
anchors.
̈ Install child seat according to the
manufacturer’s instructions.
୴୴