Filter
Top Products
136
Controls in detail
Seats
1 Seat heating switch
̈ Switch on the ignition (୴ page 36).
Switching seat heating on
̈ Press switch 1 repeatedly until the
desired heating level is set.
One or more red indicator lamps on the
switch show the selected heating level.
Switching seat heating off
̈ Press switch 1 repeatedly until all in-
dicator lamps go out.
Seat ventilation*
The switch is located on the center con-
sole. Seat ventilation can be activated
manually with the ignition on, or by the
summer opening feature (
୴ page 234).
The blue indicator lamps on the switch
show the ventilation level selected:
i
If one or more of the lamps on the seat
heating switch are flashing, there is in-
sufficient voltage available since too
many electrical consumers are turned
on. The seat heating switches off auto-
matically.
The seat heating will switch back on
again automatically as soon as suffi-
cient voltage is available.
Level
3 Three indicator lamps on
(highest level)
2 Two indicator lamps on
1 One indicator lamp on
(lowest level)
off No indicator lamp on