Filter
Top Products
232
Controls in detail
Power windows
̈ Switch on the ignition (୴ page 36).
Opening the windows
̈ Press switch 2 to 5 to the resistance
point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
̈ Pull switch 2 to 5 to the resistance
point.
The corresponding window will move
upwards until you release the switch.
Fully opening the windows
(Express-open)
̈ Press switch 2 to 5 past the resis-
tance point and release.
The corresponding window opens com-
pletely.
i
You can also open or close the win-
dows using the SmartKey, see “Sum-
mer opening feature” (
୴ page 234) and
“Convenience closing feature”
(
୴ page 235).
Depending on current position, the win-
dows may also open or close when the
air recirculation button , in the
control panel of the climate control
(
୴ page 204), (୴ page 216) and
(
୴ page 217) is pressed and held.
i
Operating the windows from the rear is
not possible if you activate the override
switch (
୴ page 89).
i
With the SmartKey in starter switch po-
sition 0 or removed from the starter
switch, the power windows can be op-
erated:
ț until you open the driver’s or front
passenger’s door
ț for at least 5 minutes.
Warning! G
If you pull and hold the switch up when clos-
ing the window, and upward movement of
the window is blocked by some obstruction
including but not limited to arms, hands, fin-
gers, etc., the automatic reversal will not op-
erate.