Filter
Top Products
284
Controls in detail
Useful features
Switching off
̈ Turn switch at the tip of stalk in direc-
tion of arrow 2.
The heated steering wheel is switched
off. Indicator lamp 1 goes out.
For information on steering wheel, see
“Multifunction steering wheel”
(
୴ page 154).
Floormats
1 Retainer pin
2 Eyelet
Removing
̈ Pull floormat off of retainer pins 1.
̈ Remove the floormat.
Installing
̈ Lay down the floormat.
̈ Press the floormat eyelets 2 onto re-
tainer pins 1.
i
Indicator lamp 1 flashes or goes out
ț in case of power surge or undervolt-
age
ț in case of a steering wheel heating
malfunction
i
The steering wheel heating switches off
automatically when you remove the
SmartKey from the starter switch or, on
vehicles with KEYLESS-GO*, when you
switch off the ignition (
୴ page 62) and
open the driver’s door.
i
To install or remove the floormat more
easily, move the driver’s seat or front
passenger seat as far to the rear as
possible (
୴ page 41).
Warning! G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using eyelets 2 and retainer pins 1.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.