Filter
Top Products
208
Controls in detail
Dual-zone automatic climate control (USA only)
Adjusting air distribution
Use air distribution control 4
(
୴ page 204) to adjust the air distribution.
The following symbols are located on the
air distribution display 8 (
୴ page 204):
̈ Use air distribution control 4
(
୴ page 204) until the desired symbol
appears in the display 8
(
୴ page 204).
The indicator lamp on button U
goes out.
Opening the cockpit air vent and center
air vents
̈ Turn thumbwheels 1 and 5
(
୴ page 202) upward.
The cockpit air vent 3 and the center
air vents 2 and 4 are open.
Closing the cockpit air vent and center
air vents
̈ Turn thumbwheels 1 and 5
(
୴ page 202) downward.
The cockpit air vent 3 and the center
air vents 2 and 4 are closed.
Opening the side air vents
̈ Turn thumbwheels 8 and a
(
୴ page 202) upward.
The side air vents 7 and b are open.
Closing the side air vents
̈ Turn thumbwheels 8 and a
(
୴ page 202) downward.
The side air vents 7 and b are
closed.
Symbol Function
a Directs air through the cock-
pit, center, side and rear pas-
senger compartment air vents
Z Directs air to the windows
X Directs air into the entire
vehicle interior
Y Directs air to the footwells
i
You can also turn the air distribution
control to a position between two sym-
bols.