Filter
Top Products
50
Getting started
Driving
Starting with the SmartKey
For information on turning off the engine
with the SmartKey, see “Turning off en-
gine” (
୴ page 60).
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the accelerator.
̈ Turn the SmartKey in the starter switch
to position 3 and hold until the engine
starts (
୴ page 36).
Starting with KEYLESS-GO*
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see “Locking with
KEYLESS-GO*” (
୴ page 62).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
̈ Make sure the gear selector lever is set
to P.
̈ Depress the brake pedal during the
starting procedure. Do not depress
accelerator.
The selector lever lock is released.
̈ Press KEYLESS-GO start/stop
button 1 once.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
i
You can also use the “touch-start”
function. Turn the SmartKey to
position 3 and release it again immedi-
ately. The engine then starts automati-
cally.
Warning! G
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.