Filter
Top Products
320
Operation
Tires and wheels
̈ Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
(
୴ page 153).
̈ Press the j or k button repeat-
edly until you see the current inflation
pressures for each tire appear in the
multifunction display or the following
message appears in the multifunction
display
Tire pressure
displayed only
after driving a
few minutes
̈ Press the reset button (୴ page 25).
The following message will appear in
the multifunction display:
Check current
tire pressure?
̈ Press the æ button.
The following message will appear in
the multifunction display:
Tire pres. monitor
reactivated
After a few minutes driving, the current
tire inflation pressure values are ac-
cepted as reference values and then
monitored.
If you wish to cancel activation:
̈ Press the ç button.
i
Reactivate the TPMS after adjusting
the tire inflation pressure to the infla-
tion pressure recommended for the
vehicle operating condition. Tire pres-
sure should only be adjusted on cold
tires. Observe the recommended tire
inflation pressure on the placard on the
driver's door B-pillar (
୴ page 305).
Some vehicles may have supplemental
tire pressure information for driving at
high speeds (
୴ page 312) or for vehicle
loads less than the maximum loaded
vehicle condition. If such information is
provided, it can be found on the inside
of the fuel filler flap.
୴୴