Filter
Top Products
132
Controls in detail
Memory function
The memory button and stored position
buttons are located on the door.
M Memory button
1, 2, 3 Stored position button
̈ Switch on the ignition (୴ page 36).
or
̈ Open the respective door.
Storing positions into memory
̈ Adjust the seats to the desired position
(
୴ page 40).
̈ Adjust the steering wheel (୴ page 42)
and exterior rear view mirrors
(
୴ page 44) on the driver’s side to the
desired position.
̈ Press memory button M.
̈ Release memory button M and press
position button 1, 2 or 3 within
3 seconds.
All the settings are stored to the select-
ed position.
Recalling positions from memory
̈ Press and hold memory position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have completely moved to the stored
positions.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
i
Releasing the memory position button
stops movement to the stored posi-
tions immediately.