Filter
Top Products
409
Practical hints
Replacing SmartKey batteries
̈ Insert the mechanical key 1 in direc-
tion of arrow in side opening.
̈ Using mechanical key 1 push gray
slide 2 to unlatch battery
compartment 3.
̈ Pull the battery compartment 3 out of
the housing in direction of arrow.
4 Battery
5 Contact spring
̈ Remove the batteries 4 in direction of
arrow.
̈ Using a lint-free cloth, insert new
batteries 4 under the contact
spring 5 with the plus (+) side facing
up.
̈ Return battery compartment 3 into
housing until it locks into place.
̈ Slide mechanical key 1 back into the
SmartKey.
̈ Check the operation of the SmartKey.
SmartKey with KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
̈ Remove mechanical key (୴ page 402).
̈ Insert the mechanical key 3 in side
opening and push grey slide
(
୴ page 408).
Battery compartment is unlatched.
̈ Pull battery compartment out of the
housing in direction of arrow
(
୴ page 408). ୴୴