Filter
Top Products
97
Controls in detail
Seats
Seat heater
Vehicles without seat ventilation*
The switch is located on the door.
1 Normal heating
2 Rapid heating
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
light up.
Switching on the seat heater
̈ Press lower switch position 1.
A red indicator lamp on the switch
lights up.
Switching off the seat heater
̈ Press lower switch position 1 again.
Rapid seat heating mode
̈ Press upper switch position 2.
Both red indicator lamps on the switch
light up.
Switching off rapid seat heating mode
̈ Press upper switch position 2 again.
i
The seat heater will be automatically
switched off after approximately
30 minutes.
i
The system switches over to normal
heating mode after approximately five
minutes. Only the right-hand indicator
lamp remains lit.
!
If one or both of the lamps on the seat
heater switch are blinking, there is in-
sufficient voltage available since too
many electrical consumers are turned
on. The seat heater switches off auto-
matically.
The seat heater will switch back on
again automatically as soon as suffi-
cient voltage is available.