Filter
Top Products
33
Getting started
Adjusting
The seat adjustment switch is located in
the door.
1 Seat fore and aft adjustment
2 Seat height
3 Seat cushion tilt
4 Backrest tilt
5 Seat cushion depth
6 Head restraint height
̈ Switch on the ignition by turning the
key in the starter switch to position 2
or pressing the KEYLESS GO*
start/stop button twice.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 1.
Seat height
̈ Press the switch up or down in the di-
rection of arrow 2.
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow 3 until your upper legs
are lightly supported.
Backrest tilt
̈ Press the switch forward or back in the
direction of arrow 4.
Seat cushion depth
̈ Press the switch forward or back in the
direction of arrow 5.
Head restraint height
̈ Press the switch up or down in the di-
rection of arrow 6.
!
When moving the seat, be sure that
nothing is in the auxiliary cup holder
and that there are no items in the foot-
well or behind the seats. Otherwise the
seats could be damaged.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.