Filter
Top Products
242
Operation
Maintenance
Calling up the service indicator
̈ Switch ignition on.
The standard display of the control sys-
tem appears (
୴ page 110).
̈ Press button k or j on the
steering wheel until the service symbol
9 or ´ appears in the speedom-
eter display and the service deadline in
the tachometer.
Resetting the service indicator
In the event that the service on your vehi-
cle is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
̈ Switch ignition on.
The standard display of the control sys-
tem appears (
୴ page 110).
̈ Press button k or j on the
steering wheel until the service symbol
9 or ´ appears in the speedom-
eter display and the service deadline in
the tachometer.
̈ Press the reset knob for about four
seconds.
This message appears in the tachome-
ter:
Do you want to reset the service
interval?
Confirm by using reset button
̈ To confirm, hold down the reset knob
until you hear a signal.
The service indicator now displays the
reset interval.
i
Only reset if the proper service has
been performed. Resetting the system
without performing proper service as
called for by the FSS will cause the FSS
to incorrectly determine the next ser-
vice interval which will result in engine
damage not covered by the Mer-
cedes-Benz Limited Warranty.
If the battery supplying the vehicle’s
electrical consumers is disconnected,
the days of disconnection will not be in-
cluded in the count shown by the ser-
vice indicator. To arrive at the true
service deadline, you will need to sub-
tract these days from the days shown
in the service indicator.
Do not confuse the service indicator
with the engine oil level indicator
:.