Filter
Top Products
158
Controls in detail
Power windows
Opening the front side windows
̈ Press switch 1 or 2.
The window (left or right) will move
downwards until you release the
switch.
If the hardtop is open, the respective
rear window will open automatically as
soon as the front window is completely
open.
Closing the front side windows
̈ Pull on switch 1 or 2.
The window (left or right) will move up-
wards until you release the switch.
If you pull and hold the switch up when
closing the window, and upward move-
ment of the window is blocked by some
obstruction including but not limited to
arms, hands, fingers, etc., the automat-
ic reversal will not operate.
Opening the rear side windows
̈ Open the front window.
If the hardtop is open, the respective
rear window will open automatically as
soon as the front window is completely
open.
If the hardtop is closed:
̈ Press again on switch 1 or 2.
The rear window will open completely.
Closing the rear side windows
̈ Close the front window.
̈ Pull again on switch 1 or 2.
The rear window will close completely.
Fully opening the front side windows
̈ Press switch 1 or 2 past the point of re-
sistance and release.
Fully closing the front side windows
̈ Pull on switch 1 or 2 past the point of
resistance and release.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping the front side windows
̈ Press or pull respective switch again.
Synchronizing power windows
The side power windows must be resyn-
chronized each time after the battery has
been disconnected:
̈ Pull the power window switches until
the side windows are closed and hold
the switches for approximately one
second.