Filter
Top Products
100
Controls in detail
Memory function
Storing positions into memory
̈ Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion (
୴ page 32).
̈ Press memory button M.
̈ Release memory button and press a
stored position button 1, 2, or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
̈ On memory switch, press and hold
stored position button 1, 2 or 3 until
the seat, steering wheel and rear view
mirrors have fully moved to the stored
positions.
Storing parking position
For easier parking you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gear R.
The exterior rear view mirror returns to its
stored driving position:
ț 10 seconds after you put the gear se-
lector lever in position D
ț immediately once you exceed a speed
of approx. 6 mph (10 km/h)
ț immediately when you press the button
for driver’s side mirror
i
Releasing the button immediately
stops movement to the stored posi-
tions.
i
The mirror parking position feature
(
୴ page 131) must be activated and the
passenger side exterior rear view mirror
(
୴ page 35) must be selected at the
time in order for the system to recall the
stored mirror position when reverse
gear R is engaged.