Filter
Top Products
131
Controls in detail
Control system
Setting parking position for exterior rear
view mirror
You can store a parking position for the
passenger exterior rear view mirror using
the memory switch (
୴ page 100).
The exterior rear view mirror will return to
its previous position when you
ț shift out of reverse (after 10 seconds)
ț exceed the speed of 6 mph (10 km/h),
regardless of which gear is engaged
ț press the driver’s side mirror button
(immediately) (
୴ page 35)
̈ Move the selection marker with button
æ or ç to the
Convenience
sub-
menu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
Mirror setting when park-
ing
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
On
or
Off
.
Trip computer menu
Use the trip computer menu to call up sta-
tistical data on your vehicle. The following
information is available:
i
The mirror parking position feature
must be activated and the passenger
side exterior rear view mirror
(
୴ page 35) must be selected at the
time in order for the system to recall the
stored mirror position when reverse
gear R is engaged.
Function Page
Fuel consumption statistics after
start
132
Fuel consumption statistics
since last reset
132
Call up range (distance to empty) 133
i
The last function called up will reap-
pear the next time you enter the trip
computer menu.