Filter
Top Products
Black plate (55,1)
2. Expand the open seams on the rear of
the seat bottom slightly to verify the
locations of the LATCH lower anchors.
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
3. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instructions.
4. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. First,
remove the anchor bracket cover on the
rear end trim.
5. Flip over the trunk board.
Trunk board
Essential SafetyEquipment
Child Restraint
2-43
CX-7_8V28-EA-06B_Edition2 Page55
Monday, March 13 2006 5:5 PM
Form No.8V28-EA-06B