Filter
Top Products
Black plate (318,1)
NOTE
To prevent damage to the wiper arm
blades when raising both the driver and
passenger side wiper arms, raise the
driver side wiper arm first. Conversely,
when setting down the wiper arms, set
the passenger side wiper arm down
first.
1. Raise the wiper arm.
2. Open the clip and insert the blade
assembly.
3. Tilt the blade assembly and remove it
from the arm.
CAUTION
To prevent damage to the windshield let
the wiper arm down easily, don't let it
slap down on the windshield.
4. Pull down the blade rubber and slide it
out of blade holder.
5. Remove the metal stiffeners from the
blade rubber and install them in new
blades.
8-22
Maintenance andCare
Owner Maintenance
CX-7_8V28-EA-06B_Edition2 Page318
Monday, March 13 2006 5:7 PM
Form No.8V28-EA-06B