Filter
Top Products
Black plate (47,1)
5. If your child-restraint system requires
the use of a tether strap, hook and
tighten the tether strap. First, remove
the anchor bracket cover on the rear
end trim.
6. Flip over the trunk board.
Trunk board
7. Fold the trunk board into the position
shown in the figure.
8. Latch the hook onto the anchor
bracket, and tighten the tether strap
following the child-restraint system
manufacturer's instructions.
9. Push the trunk board down to its
original position.
Essential SafetyEquipment
Child Restraint
2-35
CX-7_8V28-EA-06B_Edition2 Page47
Monday, March 13 2006 5:5 PM
Form No.8V28-EA-06B