Filter
Top Products
Black plate (175,1)
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
l
If you want to slightly adjust the
airflow amount, set the mode
selector dial at
.
l
For example, when the mode selector
dial is at the
position between the
and positions, airflow from
the floor vent is less than that of the
position.
A/C switch
í
Push the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Push the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function
when the outside temperature
approaches 0 °C (32 °F).
Air intake selector
This switch controls the source of air
entering the vehicle.
Press the switch to alternate between the
and positions. The indicator
light for the selected mode will illuminate.
It is recommended that under normal
conditions the switch be kept in the
outside air position.
Outside air position (
)
Outside air is taken into the vehicle. Use
this position for normal ventilation and
heating.
Recirculated air position (
)
Outside air is shut off. Air within the
vehicle is recirculated.
This position can be used when driving on
a dusty road or in similar conditions. It
also helps to provide quicker cooling of
the interior.
Interior Comfort
Climate Control System
6-7
í
Some models.
Mazda3_8U55-EA-05G_Edition1 Page175
Tuesday, May 31 2005 1:19 PM
Form No.8U55-EA-05G