Filter
Top Products
Black plate (123,1)
Automatic Transaxle Controls
Indicates that you must depress the brake pedal to shift (The ignition
switch must be in the ON position).
Indicates the shift lever can be shifted freely into any position.
Various Lockouts:
qTransaxle Ranges
The shift lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WARNING
Holding the Vehicle with P:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicl e is dangerous.
If P fails to hold, the vehicle could
move and cause an accide nt. To hold
the vehicle, set the shift lever to P AND
set the parking brake.
CAUTION
l
Shifting into P, N or R while the
vehicle is moving can damage your
transaxle.
l
Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).
Driving Your Mazda
Starting and Driving
5-11
Mazda3_8U55-EA-05G_Edition1 Page123
Tuesday, May 31 2005 1:18 PM
Form No.8U55-EA-05G