Magellan RV93635T-LMB GPS Receiver User Manual


 
22
www.magellangps.com
1. Tap the button in the top right corner of the Map screen.
2. Tap one of the Assign buttons.
3. Tap Search.
4. Tap one of the POI categories in the list.
5. If the next screen contains a list of subcategories, tap one of the POI subcategories in the
list to further narrow the search, or tap “Any xxx” to see the list of all nearby POIs from the
selected main POI category.
6. Repeat selecting subcategories until the list of POIs appear. (The list of POIs are shown
with the closest POI to your current position on top.)
7. Tap Save.
8. Using the keypad, enter a name for the button and tap
.
Setting a Route to a OneTouch Icon
With the OneTouch menu set up you can now go to a saved address or search.
1. Tap the
button in the top right corner of the Map screen.
2. Tap one of the assigned OneTouch buttons.
3. If the assigned button is for a search, the list of POIs is displayed. Tap on the desired POI.
4. The “Preview” icon at the bottom of the display allows you to step through the available
POIs while viewing their location on the map.
The “Near...” button allows you to select how the list is sorted (nearest your current
position, nearest a city you define or near an address you enter).
5. Whether the destination was chosen from a list of POIs or by an address, the GO screen is
displayed (unless you are already on a route -- see below). Tap on the Go button to begin
the route.
Note: if you are already on a route you will be asked if you want to:
Replace Destination --- this cancels the previous route and replaces it with a new
route to this destination.
Go There Now --- this inserts the destination in the route as the next destination and
you will begin routing there. Once that destination has been completed, the receiver will
begin routing to the next destination in the list.
Add To Trip --- places the destination at the end of the trip. When the final
destination of the current trip has been arrived at, the receiver will begin routing to the
destination you are inputting now.