Filter
Top Products
Setting User Options 63
Setting Detour Options
Use this option to select the default for the distance to be used to detour around traffic problems
while routing.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Detour Options.
3. Select the default for the distance to be
used to detour around traffic problems
while routing.
Set the alert timer. (Enter the time using
the keypad.). This is the time after which
the Maestro offers to detour you when it
registers that you are stuck in slow or
stopped traffic on a motorway.
Check Enable automatic detour on or off.
(Check this option on and the Magellan Maestro will automatically detour you when it
registers that you are stuck in slow or stopped traffic on a motorway.)
4. Tap Save to record the changes and exit.
Using the Simulator
When turned on, the simulator will offer the option of simulating movement on a route. Useful for
learning about the Magellan Maestro while not driving.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Simulator Mode.
3. Tap Propose simulator mode when
calculating route. When checked, the
Magellan Maestro will ask if you want the
route simulated when it is created.
Simulation mode will ignore actual
movement and should only be used for
training purposes.
Tap on the desired speed factor.
Tap <<1mi or 1mi>> to set the route
forward or backwards 1 mile.
Tap Restart to restart the route you are currently simulating from the beginning.
Tap Stop stop the current route simulation.
(The Simulate button is currently not active.)
4. Tap Back arrow to record the changes and exit.
Detour Options Screen
Simulator Mode Screen