Filter
Top Products
54 Magellan GPS Tracker
Disabling NAV Screens
You may find that you do not use one, or more, of the nine NAV screens
provided in the receiver. You have the option to disable NAV screens, except
for the Status and Position screens.
To disable a NAV screen, press MENU,
highlight SETUP and press ENTER. High-
light NAV SCREENS and press ENTER.
The NAV 1 screen will appear with a pop-up
menu asking if you want to turn this screen
off. Select OFF to disable the displayed screen
or ON and press ENTER. The COMPASS
screen is displayed with the same pop-up
menu. Select OFF or ON. You will continue
to be prompted for the other NAV screens.
Selecting a Coordinate System
A Coordinate System is provided for you. This option allows you to select
primary and secondary coordinates used for entering and viewing position
information. The most common is LAT/LON. You can choose from LAT/
LON, TD, UTM, OSGB, IRISH, SWISS, SWEDISH, FINNISH,
FRENCH, GERMAN, MGRS and USER GRID.
Press MENU, from any screen, highlight
SETUP and press ENTER. Highlight
COORD SYSTEM and press ENTER. A
pop-up menu will be displayed, highlight your
choice and press ENTER.
If a format is required for the coordinate
system you have chosen, a pop-up menu will
be displayed. Highlight your selection and
press ENTER.
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
NAV 1
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
COORD SYS
PRIMARY
SECONDARY
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESLAT/LON
DEG/MIN.MM
DEG/MIN.MMM
DEG/MIN/SEC