Filter
Top Products
Magellan GPS Tracker 25
screen), COURSE UP (the destination of the current leg is at the top of
the screen) and NORTH UP (North is at the top of the screen).
While viewing the PLOT screen, press
MENU. Highlight PLOT SETUP and press
ENTER. Use the UP/DOWN ARROWs to
select ORIENTATION and press ENTER. A
pop-up menu appears allowing you to select
TRACK UP, COURSE UP or NORTH UP.
Turning Waypoint Names On or Off. You may have too many
waypoint names that clutter your screen. To remove waypoint names,
you can turn the WPT NAMES off.
While viewing the PLOT screen, press MENU. Highlight PLOT
SETUP and press ENTER. Use the UP/DOWN ARROWs to select
WAYPOINT NAMES and press ENTER. A pop-up menu appears
allowing you to select OFF or ON.
Turning Plot Rings On or Off. When navigating, you may want to
know the distance you will travel to reach a certain destination. To find
out, you can turn the PLOT RINGS option on.
While viewing the PLOT screen, press MENU. Highlight PLOT
SETUP and press ENTER. Use the UP/DOWN ARROWs to select
PLOT RINGS and press ENTER. A pop-up menu appears allowing
you to select OFF or ON.
Setting Up Course Projection. You may want to know how long it will
take you to reach a certain distance. Under Course Projection, you can
choose from OFF or 1, 2, 5 and 10 minutes.
While viewing the PLOT screen, press
MENU. Highlight PLOT SETUP and press
ENTER. Use the UP/DOWN ARROWs to
select COURSE PROJECTION and press
ENTER. A pop-up menu appears allowing
you to select OFF or a time.
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESPROJECTION
OFF
1 MINUTE
2 MINUTES
5 MINUTES
10 MINUTES
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESORIENT
TRACK UP
COURSE UP
NORTH UP