Filter
Top Products
46 Magellan GPS Tracker
Selecting the Simulate Mode
The Simulate mode will help you become familiar with your receiver and
how it works by generating artificial position fixes. By utilizing Simulate, the
receiver will create a route and will continue until you end it. In order to end
and delete the route created, you can return to the window (where you
initiated the mode) and select OFF or power the receiver off. It is important
to reset the receiver to your current position and not the position that was
created in the Simulate mode.
To begin, press MENU from any NAV screen,
highlight SETUP and press ENTER. The
SETUP menu will appear. Highlight
SIMULATE and press ENTER.
A pop-up window will be displayed giving a list of options consisting of
OFF, AUTO and USER. Highlight OFF to turn the Simulator mode
off. Highlight AUTO to turn the Simulate on and set a simulated route.
If USER is selected, you will be asked to input
COG and press ENTER, then input SOG
and press ENTER to display a simulate
activated window.
Default setting is OFF.
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
TEMP UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
WPT NAMES
OFF
ON
WPT NAMESUSER
COG 000˚
SOG 025
M
H
M