Filter
Top Products
30 Magellan GPS Tracker
Saving a Waypoint
Waypoints are used to create routes and GOTOs. Before you can set a route
or GOTO, you must have a saved waypoint in your receiver. You have two
options when naming waypoints. You can create waypoints with either a
receiver-created name or with a name you create yourself.
Saving Your Position Fix with a Receiver-Generated Name
From anywhere in the receiver, you can save (MARK) your position with a
receiver created name. This is the fastest way to save your position.
To save a waypoint with a receiver-created name, press MARK, MARK.
The waypoint will be saved with a receiver-generated name beginning
with WPT001, WPT002 and so on.
Selecting Time Format
You may need to correct the current time or change the time format. Your
choices for time format are LOCAL 24HR, LOCAL AM/PM and UTC.
While you are viewing the TIME screen, press
MENU, highlight FORMAT and press
ENTER. A pop-up window will appear,
highlight your choice and press ENTER.
A screen will appear with your format selection and the current time
with a cursor. Use the ARROWs to make any changes to the current
time and press ENTER.
TIME FORMAT
LOCAL 24HR
LOCAL AM/PM
UTC