Magellan 760 GPS Receiver User Manual


 
Appendix A
108
Adding Addresses from an IrDA-Equipped Device
The Magellan RoadMate comes equipped with an IRDA receiver (see “Front View” on page 4). With this, you can “beam”
addresses from your Palm or other equipped device.
Do not attempt to transfer addresses while you are driving, at a stop, or in traffic. Address transfer should be done only while
the vehicle is parked.
Make sure the Magellan RoadMate is turned on and at the Select Destination screen.
From your Palm or other IrDA-equipped device, select the address you wish to transfer to the Magellan RoadMate and select
the IrDA transfer function.
Aim the device directly at the IRDA receiver on the Magellan RoadMate.
If the transfer was successful, the Magellan RoadMate will begin “searching” for the address in its database.
The Address Book screen will appear with the information from your device.
You can then choose to edit the information. Or, if you are satisfied with the entry, select Save.
The entry is stored in your address book.
Appendix A