Filter
Top Products
25
www.magellangps.com
POWER Settings
Extending the battery life of your device is important so you don’t have to carry extra batteries around
and aren’t interrupted with changing batteries while you are out on your trek.
Active Suspend Timer
The device can be set to automatically go into sleep mode whenever a defined length of time
passes without a keypress. While in sleep mode the display turns off but will continue tracking
your progress. Press the Power button quickly to exit the sleep mode.
1. From the SETTINGS menu, highlight POWER and press ENTER.
2. With ACTIVE SUSPEND TIMER highlighted, press ENTER.
3. A menu of available time durations (or NEVER) is displayed. Highlight the time desired
and press ENTER.
NOTES
The shorter the time selected, the longer the batteries will last before
needing to be changed.
Power Off Timer
The device can be set to automatically turn off whenever a defined length of time passes
without a keypress. This will greatly help in accidentally leaving the device turned on
overnight.
1. From the SETTINGS menu, highlight POWER and press ENTER.
2. With POWER TIMER highlighted, press ENTER.
3. A menu of available time durations (or NEVER) is displayed. Highlight the time desired
and press ENTER.
NOTES
The shorter the time selected, the longer the batteries will last before
needing to be changed.
Battery Type
To get an accurate display of remaining battery life the BATTERY TYPE must be set to match the
type of batteries installed. It is highly recommended to check the BATTERY TYPE whenever you
insert new batteries.
1. From the SETTINGS menu, highlight POWER and press ENTER.
2. With BATTERY TYPE highlighted, press ENTER.
3. Highlight the battery type (LITHIUM, ALKALINE or RECHARGEABLE) and press ENTER.