Filter
Top Products
23
www.magellangps.com
Settings
Customize your Magellan eXplorist 350H receiver to fit your particular needs. Everything you need to
get the most out of the device is available in Settings.
Accessing Settings
1. From the Main Menu, scroll down and highlight Settings.
2. Press ENTER.
When viewing the map:
1. While viewing the map on a trip, press the BACK button.
2. Highlight GO TO SETTINGS (TRIP ACTIVE).
3. Press ENTER.
GMU/WMU Areas
As a hunter it is important to know the restrictions and the boundaries for the GMU (Game
Management Units) or WMU (Wildlife Management Units) that you are hunting in. The Magellan
eXplorist 350H receiver can give you a visual indication of the GMU/WMU boundary displayed on the
map as well as provide you with alerts when you are approaching or leaving a GMU/WMU area.
Turning On GMU/WMU Map Overlay
If you are planning on using GMU/WMU boundary information you need to turn on the
Hunting Overlay Map. Once turned on, you do not need to turn it on again.
1. Access Settings.
2. Select MAPS and press ENTER.
3. Select MAP SELECTION and press ENTER.
4. Highlight OVERLAY MAPS and push the joystick to the right.
5. Highlight the Hunting Areas overlay map. If it is OFF, press ENTER to toggle it ON.
6. Use the BACK button to exit out of Settings.
With the Hunting areas turned on the GMU/WMU boundary for the area you are currently in is
displayed on the map. But suppose you want to view the boundary for a different GMU/WMU
area.