Filter
Top Products
User Options 47
Speed Trap Settings
Your Magellan RoadMate is preloaded with the location of speed cameras, so that you can be alerted
when approaching a speed control area. This option provides a way to select another speed trap file,
to select speed trap categories that are displayed on the map, to set alarms for each speed trap
category and to set up the alert parameters.
There will be one or more Speed Trap databases preloaded in your Magellan Roadmate, depending
upon the model you have. Each database covers countries as follows:
France, Andorra FRA-AND_NavX
Great Britain, Ireland GBR_NavX IRL_NavX
Germany, Austria DEU_NavX AUT_NavX
Spain, Andorra and Portugal ESP-AND_NavX PRT_NavX
Italy, Austria ITA_NavX AUT_NavX
Norway, Sweden, Denmark and Finland NOR_NavX SWE_NavX.mgln FIN_NavX.mgln
Belgium, Netherlands and Luxemburg BEL_NavX NLD_NavX.mgln LUX_NavX
By default, none of the speed trap databases are selected. Before you can use them you will need
to select the database file for your country.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Speed traps.
3. Tap Select a speed traps file to activate a stored speed trap file.
4. Tap select the file by clicking on the name. The name of the file will then appear in the
speed traps menu at the bottom of the screen.
Updating Speed Trap Databases
If you want to update your speed trap database files, you can go to Navx web site www.navx.com,
and subscribe to the speedtrap service. You will be asked to download a Navx agent (hidden process
on your computer). Once installed, the Navx agent will automatically check if new speedtraps
databases are available on the web when your computer is connected to the web, If a new database
is found, it will automatically load the speed trap database with your computer connected to the
web and your Magellan RoadMate connected to your computer.
Please visit www.navx.com for more information about Navx services.
Setting the Map in 3D or 2D Mode
See the chapter on Maps for information regarding 3D and 2D modes of the map.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Map Options.
3. Select 3D Map or 2D Map.
4. Tap Save to record the changes and exit.
Setting the Map Display to Heading Up or North Up
The map can be displayed with the top of the display in the direction of your heading or North.
1. From page 2 of the Main Menu, tap User Options.