Filter
Top Products
SYSTEM SETUP
The following features are available through
the "System Setup" menu. To access this
menu, press the MENU key, then press the
up or down arrow keys until the "System
Setup" menu appears. Press the right arrow
key. The screen shown at right appears.
Audio/Display
You can adjust the display's contrast, turn
the speaker off or on, and adjust the light
intensity using this menu. To do this, high-
light the "Audio/Display" label on the system
setup menu, then press the right arrow key.
The screen at right appears.
To adjust the contrast, highlight the "Con-
trast" menu, then use the left or right arrow
key to change it. Look at the pattern at the
bottom of this screen to adjust the contrast
for the best sharpness. To turn the speaker
off, highlight the "Speaker" label, then press
the left arrow key to turn it off. To adjust the
backlight, highlight the "Backlight" label, then use the left and right arrow
keys to change the light's intensity.
System Information
This screen shows some basic data about the sonar unit. To view this,
highlight the "System Info" label on the System Setup menu, then press the
right arrow key. The system info screen appears. To erase this screen,
press the EXIT key. The unit returns to the System Setup menu.
Units of Measure
The sonar normally shows the depth in feet,
speed in statute miles per hour, distance in
statute miles, and temperature in degrees
Fahrenheit. You can change any of these
settings using the units of measure menu. To
do this, highlight the "Units of Measure" label
on the System Setup menu, then press the
right arrow key. The screen at the top of the
next page appears. Highlight the item you
want to change, then press the right or left
arrow key to change it. To erase this screen, press the EXIT key.