Filter
Top Products
When the unit is first turned on, FishTrack is off. To turn the FishTrack
feature on, press the menu key, then press the up or down arrow keys until
the FISH ID menu appears. Now press the right arrow key. Pressing it once
switches the Fish ID feature on, but leaves FishTrack off. To turn FishTrack
on, press the right arrow key again, which highlights the "TRACK" label on
the Fish ID menu.
CHART SETUP
You can customize the chart screen.
To do this, press the MENU key, then
press the up or down arrow keys until
the "CHART SETUP" menu appears.
Now press the right arrow key. The
screen shown at right appears.
The digital depth display at the top left
corner of the screen normally shows in
large numbers. You can change this to
smaller numbers or turn it off com-
pletely using the "Show Digital" menu
at the top of this screen.
You can also turn the temperature, speedometer, distance log, zoom bar,
zone alarm bar, and cursor on or off using this menu. See below for more
information on these items.
CHART CURSOR
This sonar unit has a chart cursor that
allows you to pinpoint a target’s depth.
The cursor is simply a horizontal line
that extends across the display from
left to right. A depth box at the end of
the line on the right side shows the
line’s depth. In the example at right,
the cursor (line) is at 29.8 feet.
To display the chart cursor, highlight
the "Show Cursor" on the "Chart Setup"
menu, then press the right arrow key.
A screen similar to the one at right
appears. Use the up and down arrow
keys to move the cursor up or down to
the desired depth.