Filter
Top Products
AUTOMATIC
When the sonar unit is first turned on,
the Automatic feature is enabled. This
is indicated by the word “AUTO” at the
top of the screen. The Automatic fea-
ture adjusts the sensitivity and range
so the bottom signal is displayed in the
lower half of the screen at all times.
To turn Automatic off, first press the
MENU key, then press the up or down
arrow keys until the "AUTO" menu
appears. Press the left arrow key to
switch to the manual mode. The letters
“Man” appear at the top of the screen,
indicating the unit is in the manual mode. To turn Automatic on, repeat the
above steps to get the auto menu, then press the right arrow key.
Reset Window Groups
To return all groups to the factory set-
tings, use the "Preset Options" on the
"System Setup" menu. To return only
one group to its factory setting, select
"reprogram groups" from the "System
Setup" menu. The screen shown below
right appears.
Press the left or right arrow key until the
desired window group that you want to
reset appears. When it appears, simply
press the down arrow key and the unit
will reset only that group. Press the
EXIT key to erase the menu.