Filter
Top Products
29
Section 3:
Music Mode Operation
This section addresses the unit's Music Mode operation. Music Mode is
designed as a powerful but simple interface for playing back your music
collection while navigating. If you'd rather skip ahead, you can look at
Sec. 4 which starts on page 39 and is full of details on setting up and
customizing the iWAY's various options. Or you could turn to Sec. 5
starting on page 49, where you'll learn about Searching and how the
iWAY generates Turn-by-Turn routes.
Before you start playing your music, it's a good idea to learn about the
different keys, the two Page screens and how they work together. If
you've already read Sec. 2, then you already know what you need to
about the keyboard, so you can skip ahead to the one-page Music Mode
Quick Reference on page 33.
Keyboard
The iWAY keyboard consists of five buttons along the right side of the
unit's case. (You can see an illustration of the keyboard at the begin-
ning of Sec. 2 on page 11.) These are the keys, on the iWAY keyboard,
from top to bottom:
1. SPEAK/VOLUME – Push this key once to make the iWAY repeat
the current navigation instruction. Press and hold this key to adjust the
frequency and output volume of spoken commands (as well as the vol-
ume of music playback). For more information on these sounds options,
see the heading "Sound and Voice Setup" in Sec. 4.
2. MAP/MUSIC – Press this key to toggle between the two page
screens. Each page represents one of the unit's major operation modes.
See Sec. 2 for full details on the Map Mode.
3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. We'll discuss the
Map Menu in the following pages, and the Main Menu (accessible from
the Map Menu) in Sec. 4.
4. FIND – In Music Mode, the Find button launches a special Audio
Search menu that lets you search for a song using all or part of its file-
name. In Map Mode, the Find key is used to search for travel destinations.
5. POWER/LIGHT– The Power key turns the unit on and off and acti-
vates the backlight. To turn on the unit, press
POWER. To turn on the
backlight, press
POWER again. The unit has three preset backlight lev-
els to select from. Repeatedly pressing
POWER will cycle through the