Filter
Top Products
43
Navigate to a Point of Interest
For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above; just use the cursor to select the POI.
The other method involves searching for POIs with the Find Waypoint
command, launched with the
WPT
key. (See the searching example ear-
lier in this section, or turn to Sec. 6, Searching, for detailed instructions
on POI searches.)
After you have looked up an item with the Find Waypoint command,
use the → to make sure the
G
O
T
O
command is highlighted at the top of
the screen, then press
ENT
. The GlobalMap 4000M begins showing
navigation information to the item.
To cancel navigation, press
MENU
|
MENU
|↓ to
C
ANCEL
N
AVIGATION
|
ENT
|←
to
Y
ES
|
ENT
. The GlobalMap 4000M stops showing navigation informa-
tion.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the Global-
Map 4000M as you travel. It's a travel history, a record of the path you
have taken. Trails are useful for repeating a journey along the same
track. They are particularly handy when you are trying to retrace your
trip and go back the way you came. On the screen, trails are repre-
sented by a solid line extending from the back of the current position
arrow.
The GlobalMap 4000M is set at the factory to automatically create and
record a trail while the unit is turned on. The unit will continue re-
cording the trail until the length reaches the maximum trail point set-
ting (default is 2,000, but the unit can record trails 9,999 points long).
When the point limit is reached, the GlobalMap 4000M begins record-
ing the trail over itself.
By default, the trail flashes once a second, making it easier to see
against the background map. With the default auto setting, the
GlobalMap 4000M creates a trail by placing a dot (trail point) on the
screen every time you change directions. (The methods used for creat-
ing a trail and the trail update rate can both be adjusted or even turned
off. See Sec. 5 for Trail Options.)
To preserve a trail from point A to point B, you must "turn off" the trail
by making it inactive before heading to point C or even back to point A.
When the current trail is set inactive, the GlobalMap 4000M automati-
cally creates and begins recording a new trail.