Filter
Top Products
6
The recommended mounting surface thickness is 3/8" to 1/2" (9 mm to
13 mm). If the mounting surface is thin, a doubler should be added. If it
is thicker, longer bolts must be purchased.
WARNING:
The scanner will be damaged if bolts penetrate more
than 9/16" (15 mm).
Also, consider the cable route from the scanner to the operator’s loca-
tion. Avoid routing the interconnecting cable through areas of possible
damage from moving objects, machinery, exposure to chemicals or high
temperature.
The radar should be installed at least 1 foot above all persons to pre-
vent microwave radiation exposure. This antenna is installed cor-
rectly. It safely exceeds the recommended separation distance
.