Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 43
Removing the fork protectorbx
ದ Remove the fork legs. ( P. 41)
500105-10
ದ Remove screwsb on the left fork leg. Remove the fork protector upwards.
ದ Remove the screws on the right fork leg. Remove the fork protector upwards.
Installing the fork protectorbx
500105-10
ದ Check parts for damage and wear. Replace damaged or worn parts.
ದ Position the fork protection on the left fork leg. Mount and tighten screwsb
.
Specification
Remaining screws, chassis M6 10bNm (7.4blbfbft)
ದ Position the fork protection on the right fork leg. Mount and tighten screws.
Specification
Remaining screws, chassis M6 10bNm (7.4blbfbft)
ದ Install the fork legs. ( P. 42)
Removing the lower triple clampbx (EXC-RbSIXbDAYS, XCR-WbUSA)
ದ Remove the fork legs. ( P. 41)
(XCR-WbUSA)
ದ Dismount the start number plate. ( P. 47)
(EXC-RbSIXbDAYS)
ದ Remove the headlight mask with the headlight. ( P. 46)
ದ Dismount the front fender. ( P. 46)
500099-10
ದ Remove screwsb and hang the CDI control unit to the side.
Info
Do not unplug the CDI control unit.
ದ Remove screwb
. Remove screwb, take off top triple clamp with the handlebar
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
500100-10
ದ Remove o-ringb. Remove protector ringb.
ದ Remove the lower triple clamp with the steering stem.
ದ Remove the upper steering head bearing.