Filter
Top Products
OPERATING ELEMENTS 19
Display mode SPEED/S1 (stop watch 1)
400327-01
ದ Press the buttonb briefly and repeatedly until S1 appears at the top right of the
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel sensor.
The calculation of this value starts with the first impulse of the wheel sensor and ends
3 seconds after the last impulse.
Press the buttonb"+". No function
Press the buttonb"ತ". No function
Press the buttonb
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the buttonb
briefly.
Next display mode
Display mode SPEED/S2 (stop watchb2)
400328-01
ದ Press the buttonb briefly and repeatedly until S2 appears at the top right of the
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the buttonb"+". Starts or stops S2.
Press the buttonb"ತ". No function
Press the buttonb
for 3 - 5 seconds.
Displays of S2 and A2 are reset to 0.0.
Press the buttonb
briefly.
Next display mode
Overview of speedomer functions
Display Press the buttonb"+". Press the buttonb"ತ". Press the buttonb for 3 -
5 seconds.
Press the buttonb
briefly.
Display mode SPEED/H
(service hours)
No function No function The display changes to
the Setup menu of the
speedometer functions.
Next display mode
Display mode
SPEEDb/bCLK (time)
no function no function The display changes to
the Setup menu of the
clock.
next display mode
Display mode SPEED/LAP
(lap time)
Starts or stops the
clock.
Stops the current lap
time and saves it, and
the stop watch starts
the next lap.
The stop watch and the
lap time are reset.
Next display mode
Display mode
SPEED/ODO (odometer)
No function No function ದ Next display mode
Display mode SPEED/TR1
(trip masterb1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/TR2
(trip master 2)
Increases value of TR2.
Reduces value of TR2. Deletes value of TR2. Next display mode
Disply mode SPEED/A1
(average speedb1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/A2
(average speed 2)
No function No function ದ Next display mode
Display mode SPEED/S1
(stop watch 1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/S2
(stop watchb2)
Starts or stops S2. No function Displays of S2 and A2
are reset to 0.0.
Next display mode
Overview of conditions and ability to be enabled
Display The motorcycle is
standing
Menu can be en-
abled
Display mode SPEED
Display mode SPEED/H (service hours) •
Display mode SPEEDb/bCLK (time) •