MAINTENANCE WORK ON CHASSIS AND ENGINE 40
400189-10
ದ Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
» If there is noticeable play present:
(EXC-RbSIXbDAYS, XCR-WbUSA)
ದ Adjust play of the steering head bearing. ( P. 40)
(EXC-RbEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Adjust play of the steering head bearing. ( P. 40)
ದ Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
» If click positions are noticeable:
(EXC-RbSIXbDAYS, XCR-WbUSA)
ದ Adjust play of the steering head bearing. ( P. 40)
(EXC-RbEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Adjust play of the steering head bearing. ( P. 40)
ದ Check the steering head bearing and replace if required.
ದ Remove the motorcycle from the work stand. ( P. 32)
Adjusting play of steering head bearingb
x
(EXC-RbEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Jack up the motorcycle. ( P. 32)
100022-10
ದ Loosen screwsb andb.
ದ Loosen and retighten screwb
.
Specification
Screw, top steering head M20x1,5 10bNm (7.4blbfbft)
ದ Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
ದ Fully tighten screwb
.
Specification
Screw, top triple clamp M8 20bNm
(14.8blbfbft)
ದ Tighten screwb
.
Specification
Screw, top steering stem M8 20bNm
(14.8blbfbft)
ದ Check play of steering head bearing. ( P. 39)
Adjusting play of steering head bearingb
x
(EXC-RbSIXbDAYS, XCR-WbUSA)
ದ Jack up the motorcycle. ( P. 32)
500103-11
ದ Loosen screwb. Remove screwb.
ದ Loosen and retighten screwb
.
Specification
Screw, top steering head M20x1,5 10bNm (7.4blbfbft)
ದ Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
ದ Fully tighten screwb
.
Specification
Screw, top triple clamp M8 17bNm
(12.5blbfbft)
ದ Mount and tighten screwb
.
Specification
Screw, top steering stem M8 17bNm
(12.5blbfbft)
Loctite
®
243™
ದ Check play of steering head bearing. ( P. 39)