Filter
Top Products
00AA
00
0
BB
00AA
MAINTENANCE WORK ON CHASSIS AND ENGINE 34
400210-10
ದ Turn the adjusting screwb clockwise until it stops.
Info
Do not loosen nutb!
ದ Turn back counterclockwise the number of clicks corresponding to the shock ab-
sorber type.
Specification
Rebound damping
Comfort 24bclicks
Standard 22bclicks
Sport 20bclicks
Info
Turn clockwise to increase damping, turn counterclockwise to reduce sus-
pension damping.
Measuring rear wheel sag unloaded
ದ Jack up the motorcycle. ( P. 32)
400220-10
ದ Measure the distance ದ as vertical as possible ದ between the rear axle and a fixed
point, for example, a mark on the side cover.
ದ Make a note of the value as measurementb
.
ದ Remove the motorcycle from the work stand. ( P. 32)
Checking static sag of the shock absorber
400221-10
ದ Measure distanceb of rear wheel unloaded. ( P. 34)
ದ Ask someone to help you by holding the motorcycle upright.
ದ Measure the distance between the rear axle and the fixed point again.
ದ Make a note of the value as measurementb
.
Info
The static sag is the difference between measurementsb andb.
ದ Check the static sag.
Static sag 35bmm (1.38bin)
» If the static sag is less or more than the specified value:
ದ Adjust the spring preload of the shock absorber. ( P. 35)