MAINTENANCE WORK ON CHASSIS AND ENGINE 183
700327-14
– Remove screw with washer on the left and right side of the vehicle.
– Press the rear end up until the drill holes of the frame are level with the upper front
drill holes of the frame rear.
700329-01
– Fit the screw and washer on the left and right sides of the vehicle, and tighten.
Guideline
Screw, subframe M8 25Nm
(18.4lbfft)
Loctite
®
243™
700327-13
– Tighten the screw on the left and right sides of the vehicle.
Guideline
Screw, subframe M8 25Nm
(18.4lbfft)
Loctite
®
243™