KTM 1190 RC8 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 180
9.76Adjusting rear frame position
Warning
Danger of accidentsModifications to the chassis can seriously alter the vehicle's handling characteristics.
Following modifications, ride slowly at first to get the feel of the new handling characteristics.
700327-10
Setting a higher seat position:
Remove screw with washer on the left and right side of the vehicle.
Press the rear end down until the drill holes of the frame are level with the lower
front drill holes of the frame rear.
700329-01
Fit the screw and washer on the left and right sides of the vehicle, but do not
tighten.