KTM 1190 RC8 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 179
700320-01
Tighten the screw.
Guideline
Screw, handlebar stub M8 20Nm (14.8lbfft)
Repeat the adjustments on the other handlebar stub.
Move the handlebar to and fro over the entire steering range.
» If the cables restrict the freedom of movement of the steering:
Correct the cable routing.
When fitting the spacers, carry out these steps in the same way.
Info
The cables must then be positioned between the upper triple clamp and the
handlebar stub.
9.75Rear frame position
400439-10
The frame rear height can be set to two different positions, enabling ergonomic adjustment
of the seat height.
Seat height (standard) 805mm (31.69in)
Seat height 825mm (32.48in)